Tripp-Lite Mounting Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made for the Tripp-Lite long surge protector. Bracket mounts around sockets to stop it from slipping.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 143
- Makes
- 1
- Views
- 579
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Made for the Tripp-Lite long surge protector. Bracket mounts around sockets to stop it from slipping. My printer messed up with a layer skip, (bad printer) but brackets still work. I heat press thread inserts into the bottom bracket and use 3mm screws to affix them together. They are mounted 13 7/16 inches (87.3mm) apart. I used short ¾ inch door hinge screws to mount it to the surface. The holes on the bottom plate have built in countersinks. Note: The power cord is converted on mine, they do not normally come this way.