1 / 11
MT3608 DC-DC Adjustable Boost StepUp Module Housing Enclosure Box - two version: w/wo USB - print in place
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
title and pics say it all :)
- Rating
- 4.667 / 5
- Likes
- 33
- Downloads
- 158
- Makes
- 5
- Views
- 808
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I suggest you print in PETG with 0.2mm layers. Print-in-place model. No supports needed. Fasten strain relief for cable with M3 screws directly into the printed holes.
2023-12-03 Version with cable strain relief on both sides added. For projects that do not use the microUSB port.
2024-09-25 Length of the both end wire version corrected