CreationSpace Pro Frog Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved outer shell for the CreationSpace Pro electric screwdriver
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 65
- Makes
- 4
- Views
- 492
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Everybody who has received a CreationSpace Pro lately is familiar with the hinges on the case… The screwdriver is great, but those hinges will fail long before anything else. I set about to redesign the case as a result! It turns out that the insert in the case is fantastic, so rather than reinvent that wheel, it's reused here.
I previously released an entirely self-designed solution, but wanted something more rugged. Rather than reinventing the wheel, the Frog Box v2.0 by Nibb31 combined with Frog Box 2.0 Shortened Latches by Bounc3D provided a perfect box to use! It's not quite as thin as the previous design, but it's significantly more durable!
Inside the box you can fit the magnetic workpad, the instruction booklet, USB charging cable, or any other spare parts you may want to carry with your screwdriver.
Instructions
Print in the material of your choice and simply screw the parts together.
Bill of Materials
- 1x Top Shell (printed)
- 1x Bottom Shell (printed)
- 2x Hinge (printed)
- 2x Latch (printed)
- 8x M3x20 screw
Credits
- Frog Box v2.0 by Nibb31 provided under CC BY-NC-SA 4.0
- Frog Box 2.0 Shortened Latches by Bounc3D provided under CC BY 4.0