30mm Octagon Socket for 3/8" Socket Wrench Baby Playpen Bolts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
30mm Octagon Socket to secure Costzon Baby Playpen
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 67
- Makes
- 0
- Views
- 371
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
I hope this can be use to parents out there. Like a lot of parents, we will put our youngest kids in a gated playpen if we need to attend to other errands in the house. We have the Costzon Baby Playpen (Amazon), which are very flexible but are notorious for getting loose. These playpens are secured with 30-31mm plastic octagonal bolts, so a traditional hex socket won't work. Using an adjustable wrench will scratch up plastic and create sharp edges. This print is a 30mm octagonal socket to fit a 3/8" socket wrench. The 3/8" will add a little more material and density to prevent it from breaking. Torque down the bolts within reason.
This is based on a parametrix hex socket from daprice on Thingiverse: https://www.thingiverse.com/thing:91496
I modified the amount of sides from 6 to 8 to fit the playpen bolt.