1 / 3
My Deer and Dearest - Filament Paint
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Converting my drawings to filament paint, hope you like it :)
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 83
- Makes
- 0
- Views
- 527
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My Deer and Dearest
200x200 mm filament paint print
Works as a night light shade too.
Print at 100% infill with a layer height of 0.07mm with a base layer of 0.2mm
Filaments Used:
PLA PolyLite White Transmission Distance: 5
PLA PolyLite Beige Transmission Distance: 1.5
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Dark Blue Transmission Distance: 0.5
Swap Instructions:
Start with White
At layer #5 (0.48mm) swap to Beige
At layer #6 (0.55mm) swap to Steel Grey
At layer #9 (0.76mm) swap to Dark Blue for the rest.
Happy Printing:)