1 / 6
Hueforge Stormtrooper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had AI generate a few stormtroopers and chose this one to print using the heightmap of Hueforge.
- Rating
- 5 / 5
- Likes
- 72
- Downloads
- 230
- Makes
- 7
- Views
- 1,292
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
This was printed on my P1P, which takes about 1 hour. Below are the instructions for swapping and layer height. Everything but these settings were stock for the default profile (except for machine gcode). Takes about 8-10 grams of material, depending on flushing.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA Elegoo Black Transmission Distance: 1
- PLA Polymaker Grey Transmission Distance: 10
- PLA Elegoo White Transmission Distance: 8
Swap Instructions:
- Start with Black
- At layer #7 (0.64mm) swap to Grey
- At layer #12 (1.04mm) swap to White for the rest.
I have attached both the stl for your own printer, and also the .3mf file that I have set up for Bambu.