1 / 2
Replacement frame / body for Walkera QR Ladybird V2 (or V1) Quadcopter — image 1
1 / 2

Replacement frame / body for Walkera QR Ladybird V2 (or V1) Quadcopter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I kept breaking the frame of my LadyBird, so I designed one that I can print. It is pretty strong but light enough to…

Rating
0 / 5
Likes
4
Downloads
13
Makes
0
Views
147
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I kept breaking the frame of my LadyBird, so I designed one that I can print. It is pretty strong but light enough to work just fine! :)

Instructions

Print at 40% infill. Unless your bridging is calibrated perfectly (mine isn't) you will probably need to file some of the sagging material away from the battery compartment to get the battery to fit properly.

The openings for the arms might be a bit undersized. If so, just widen them with a small file or hobby knife. Be careful though, you want the arms to fit snugly!

Mount the electronics using the small rubber spacers from the original body.

Category: R/C Vehicles

Tags