1 / 2
Generic fridge door shelf dividers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple dividers for most fridge doors
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 231
- Makes
- 1
- Views
- 911
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple dividers that slot on to the shelves to keep items separated, and to stop things falling over when you open and close the fridge door.
Available in two different sizes, depending on the height of the drawer - 52mm high and 30mm high.
Even with a 0.4 nozzle you can print these in around 20/30 minutes by using a layer height of 0.3mm and a line width of 0.6mm (yes, you really can exceed the nozzle width).
Flat side down for easy printing, and to maximise strength. I also suggest letting it cool a bit before trying to remove it, otherwise it will probably bend a little.