Eureka Mignon Stark base and tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tray for catching coffee grounds, fits Eureka Mignon Stark.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 65
- Makes
- 0
- Views
- 840
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Eureka Mignon Stark is a very nice grinder, but as with many on-demand grinders a lot of coffee grounds misses the portfilter and ends up below the chute. This tray will reduce the need for sweeping the counter top and will keep the kitchen a bit tidier.
I couldn't find a tray for the Stark, so I designed my own. I wanted the top lip of tray to be tucked in under the grinder for a cleaner look and catching all grinds in the tray.
Please note that this model is for the Stark variant of the Mignon which is 128 x 186mm and NOT for the regular variants such as Specialita, Perfetto, Filtro and others which are smaller.
According to the Eureka website the Mignon XL is slightly smaller at 120 x 180 mm but I'm betting this is a typo and that the model will fit the XL as well.
The model has slots for 4 magnet with the dimensions 3x6 mm. Insert a pause in your slicer and insert them, it will work fine without them but I like the “click” that the magnets provide. There are also recesses at a depth of 0.6 mm for rubber feet. You might want to expand these depending on what feet you have at hand.
Print at a layer height of 0.20 mm.