Micro SD reader housing
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.34 – €0.41 net (excluding VAT)
For file: microSD reader housing_0.4n_0.05mm_PLA_MK4_33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.37 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 33 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A replacement housing for cheap micro SD readers from Aliexpress and eBay.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 36
- Makes
- 1
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi, I've noticed that most micro sd readers bought from Aliexpress or eBay work pretty well, but have a flimsy plastic housing that quickly breaks. If you manage to extract the PCB from such a reader, you can insert it in this housing and it will work again.
I'm pretty new to 3D printing, so I didn't experiment with any special print settings.
Supports: autogenerated, everywhere
Print settings: 0.05mm ULTRADETAIL
Infill: 100%
Printing time on an MK4: 33 minutes
The supports are necessary so that the housing does not collapse, but are very easy to cut out using a scalpel. Then just insert the SD reader PCB into the thing and you're good to go. It will fit nicely into your PC's USB port.