1 / 2
Gulfcoast Robotics LED Extended Bracket - Mount on Vertical Extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slightly increased length allows mounting on the vertical extrusions instead of the horizontal top extrusion.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I've got a bunch of stuff attached to my top extrusion so I can't use the included brackets. However, as shipped they aren't wide enough to work with the vertical extrusions.
Remove the existing bracket and replace with this printed part. Uses the same screws/hardware and mounts the same way. You'll need an actual screwdriver; most bit holders are too wide.
I didn't want to deal with the plug side so this ends up placing the LED bar off center.