1 / 2
Vesk character from Starfinder TTRPG
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is model of Grimlockar, my Vesk character from Starfinder TTRPG. Built at Heroforge.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 128
- Makes
- 1
- Views
- 613
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Public Domain
I can't pick right settings to print it! Using Cura, printing on Sovol SV06 with all the default out of the box setup (0.4mm nozzle, I believe). Best attempt was with these settings, as of default Sovol3D Cura's “Extra Fine” profile:
- Orientation: Upside down.
- Layer height: 0.08mm
- Initial layer height: 0.3
- Infill: 50%
- Print speed: 35 mm/s
- Enable Retraction: True
- Z Hop when retracted: True
- Generate Support: True
- Support Structure: Tree
- Support Placement: Touching Buildplate
- Support Overhang Angle: 50
- Build Plate Adhesion: Brim
Main problem: First layers of overhangs are dragged away at some point - fingers, tail tip, elbow, etc.