1RU Bracket for GPU Micro PC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small bracket to support the GPD MicroPC with holes for a 1RU mounting
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
The GPD Micro is a handy beast when dealing with physical hardware. Serial port, ethernet port, handy form-factor, all-round good guy.
But finding a flat surface in the rack can be a pain and the small form factor does make typing a bit of a challenge. So here's a small rackable tray to support the GPD Micro in your rack while you're working.
Spacing is for 1RU standard. I stuck this in a Sun rack using the provided M8 screws; you might need slightly longer than average cage nut screws in your case.
I'd recommend printing out of PETG or ABS rather than PLA to avoid heat creep.