1 / 3
Wet wipes wall mount with command strips
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of @FusioN Wet wipes wallmount case. 5mm walls. No screw holes, just cuts for 4 command strips on the back.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 68
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted something that did not require screws on drywall and the wife likes command strips. Walls are 5mm so it should be pretty ridged. Raised the front a bit higher. Works well with my Walmart wipes. I used .5 cut for thickness and had a little overhang bits but it was not bad. Also the cuts are for the largest foam command strips. I used the small ones and they work just fine holding it to the wall.