Toro Mower Wheel Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€14.51 – €17.73 net (excluding VAT)
For file: Toro-Reifen-BodyPocket004_0.3mm_PLA_MK3S_15h6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €16.12 excluding VAT (range midpoint).
- Weight reported by the author
- 223 g
- Print time reported by the author
- 15.1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a replacement for the wheel part of a Toro Mower.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 53
- Makes
- 0
- Views
- 462
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
It works better than expected. The acceptance criterion was that the mower must be able to climb a 100% / 45 Degree slope.
The PLA print wears down on hard surfaces and stones but not as much as expected. Maybe if you have TPU at hand and can print it, this would be the best option.
The wheel sits very tight and it needed a bit of force to get it on the rim. Pro tip: Use gloves as the outer part can hurt your hands.