1 / 20
Screwless vinyl record wall holder with customizable letters
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for vinyl records that uses large command Velcro strips. Has removable letters so you customize what it says
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 75
- Makes
- 1
- Views
- 1,062
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
A wall mount that uses large size Velcro command strips instead of of screws. To make a custum text open the Blank Base file in Fusion 360 and create a sketch and center the text to the model then extrude or cut the ends to be flush. NOW SPINNING v2 and Record_Holder_w_holes can be printed at 0.28 layer height and 20% infill. Pin V3 Needs to be printed at 0.2 layer height and 100% infill
Orient prints as shown in pictures.
Supports: None
Infill: 20% (100% on Pin V3)