1 / 4
Pioreactor Vial Cap A, with closed plug
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is our Vial Cap A design that ships with each Pioreactor. It fits snuggly on our 20ml vials.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 135
- Makes
- 0
- Views
- 623
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution — NoDerivatives
This is our Vial Cap A design that ships with each Pioreactor. It has 24-400 threads, and a G1/8 threaded hole on top.
Printing
Important: only use high-temperature plastics if you plan to heat-sterilize this cap. We use Prusa's Polycarbonate and Polycarbonate-CF
- 3 vertical shell perimeters
- 0.15mm layer height
- Print with the top-side down for best results
Adding an o-ring insert underneath
To avoid leaks, we add a 1/16" W, 3/4" ID, 7/8" OD o-ring underneath. It's secured with some high-temperature silicone. Tip: we put the uncured silicone into a syringe.