1 / 3
Check valve for ventilation (125 mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Preview.stl - not for printing, but for rendering.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 153
- Makes
- 2
- Views
- 986
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Preview.stl - not for printing, but for rendering.
Print Settings
Printer:
Geralkom Vector 200
Rafts:
No
Supports:
No
Resolution:
0.1 -0.2
Infill:
20%
Filament:
any anyany
Notes:
I recommend printing part 1 from petg with a layer of 0.2 mm, since it is inserted into the ventilation stack with a noticeable force. It must be elastic and rigid.
I recommend printing part 2 with a layer of 0.1 because to ease the weight, I made it with a thickness of only 0.5 mm.I recommend use ABS for it - it is lighter than PETG.
I also apply the source - for modification for other diameters
Category: Replacement Parts