Cable Grommet for Platsa Enclosures Sidewall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was testing the Cable Grommet Shaun Doe posted.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 170
- Makes
- 1
- Views
- 1,291
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was testing the Cable Grommet Shaun Doe posted. However after printing i figured out, hey the sidewall is thinner than the top and bottom ones :-D so the 22mm ones didnt fit perfectly.
So i decided to adjust to 18mm sidewalls and decided to adjust the design a bit. The cover is now inside between the inner and outside parts and it is clammed between the two if they are screwed together.
i also had trouble since i didnt had a 68mm drill just a 67 or 74mm one. So this one is a 67mm one :-)
Hope you guys enjoy it. Looking forward to get my Platsa enclosure finished soon.
Print instructions
printed in PETG white from "das filament" (german brand) in 0.2 layer height