1 / 2
Honeycomb Shelf Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
9.75" x 8" x 1" Honeycomb Shelf Bracket. Load Tested to > 220lbs
- Rating
- 5 / 5
- Likes
- 333
- Downloads
- 2,053
- Makes
- 10
- Views
- 5,318
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
CAD model, 9.75" wide, 8" tall, 1" thick along the main section. The corner screw hole boss is offset so you can attach a screw to the wall/shelf. The upper wall screw is angled so that if you have the lower hole lined up with a stud, you can hit the stud with the upper hole as well if you use a 3" screw. The holes are sized for drywall or deck screws.
I used PLA basic, in the "0.2mm Strength" setting on the Bambu Studio Slicer, printed on a Bambu X1C. No support.
More info about the load testing HERE