1 / 21
The Batman
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bust of the Robert Pattinson Batman.
- Rating
- 4.971 / 5
- Likes
- 477
- Downloads
- 2,883
- Makes
- 40
- Views
- 13,225
- Reviews
- 34
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Printing instructions
There's 3 versions. Only version A should require supports, because it's mainly a resin version and, well, we usually put down supports for those, right?
Version A
- Best suited for resin printers because there's not a uniform print surface at the bottom. It's made to be raised off the plate using supports. The only difference is the "V cut" which makes it looks a bit nicer, but you are really not missing out on much by printing the B version.
Version B
- This one is primarily for FDM printers because it has a big flat bottom surface area.
Version C
- Just the head, for those who want to print bigger and get all the facial details like the stubble visible.
Everything is neatly divided into folders so you know what to print. The heads of versions A and B are interchangeable an are thus marked as "AB" to indicate this.
All heads come in three versions:
_CC (concave)
- Traditional sculpture eyes where the iris is "scooped" out.
_CV (convex)
- Smooth eyeballs that are suited for those of you who wish to paint the irises, or just like the look better.
_Lenses
- Just lenses that cover the eyeholes.