1 / 1
Game of Thrones' King's Hand Bookmark — image 1

Game of Thrones' King's Hand Bookmark

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.58 – €0.71 net (excluding VAT)

For file: GameOfThrones_Bookmark_short_v3_0.4n_0.1mm_PLA_COREONE_39m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.65 excluding VAT (range midpoint).

Weight reported by the author
8 g
Print time reported by the author
39 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Bookmark created from the Hand of the King brooch made by HasiGH on Thingiverse.

Rating
5 / 5
Likes
221
Downloads
1,267
Makes
12
Views
3,730
Reviews
7

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE: I made a v3 which is a variation of the short version, that is more practical as a bookmark.
 

---
Bookmark created from the Hand of the King brooch made by HasiGH on Thingiverse (thing:630577)

There was similar bookmark on Thingiverse, but the execution was poor, so I created a new one myself in Fusion360.

There are 2 versions, long (18.6 cm) and short (16.1 cm)

(Photo is of v1 which has slightly longer gaps)

Print instructions

Printed mine with a color change at layer, where the knife pattern starts (Z>0.8mm).

Layer Height: 0.1mm
Material: PETG
Supports: No

Notes:

Use the "Thin Walls" setting when slicing for better resolution on the rim pattern.

If using PLA could probably use an even smaller layer height for better resolution on the hand. I chose PETG since it is much less brittle than PLA and is less likely to break for such a thin object.

Tags