Din Djarin & Grogu Bust (pre-supported)

Printing information

This guy comes in two parts, a bust and a base, they need to be printed separately.

There’s two versions of the bust, one regular with carved out concave eyes, and one (with cvEyes in the filename) with convex eyes, that some find better for painting. Here’s the difference:

FDM

Guy guy should probably have some supports under the cartridges in his belt on his front, even though it shouldn’t fail if you skip them but you might need to do bit of touch up to clean it, but other than that he should be support free!

Resin

The resin download comes with pre-supported files for small sized printers (like the Mars) and medium sized printers (Saturn, Mono X). It comes in two formats:

1. Lychee Slicer Lite (.lyt) files, that you can edit the supports yourself in if you feel you want to make any changes before printing (this is the recommend way), and
2. Pre-supported and pre-hollowed .stl files. I don’t recommend these because if you use anti-aliasing you’ll be applying it to the supports as well, which makes the connecting area much less sturdy and increases the chance of print failure.

There’s of course also the regular STL files there if you want to do all the slicing yourself, or print at a much larger size using something like the Phrozen Sonic Mega 8K.