15° Deflector for Scent Diffuser
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.38 – €0.46 net (excluding VAT)
For file: deflector1_PLA_MINI_0.8n_0.12z_1e.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.42 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 28.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A crooked cone-shaped nozzle to deflect the stream of vapor coming out of my diffuser.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- BSD License
I don't like how this turned out. I was going for 30° of deflection, but 15° was all I got. So go instead with my 80- or 90-degree deflectors, which work beautifully.
Instructions
Print without infill, without solid top layers, and without solid bottom layers. To avoid mid-print wall collapse, print in thin layers with at least two perimeters, and print external perimeters first. Use a brim to impove bed adhesion.