Sennheiser HD600 series earpad adapter ring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Should work with HD6xx, HD650, HD600, HD58x, HD580, HD660S, HD565, HD545 Depicted in the photo is an HD58x with Shure…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 97
- Makes
- 0
- Views
- 973
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Should work with HD6xx, HD650, HD600, HD58x, HD580, HD660S, HD565, HD545
Depicted in the photo is an HD58x with Shure SRH1540 Alcantara Ear Pads. If you remove the stock foam and use the included foam on the Shure ear pads you get a very similar sound to the stock sound with more comfort in my opinion (as these are my favorite pads).
Took the best of two adapter ring designs and combined them into one.
Assembly:
-apply rubber cement to the earpad and adapter (optional depending on pad)
-stretch the pad over the adapter
-wait for glue to dry snap, snap earpad back into headphone
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.15 adaptive
Infill:
20%
Filament: Generic ABS
Notes:
I printed at 100.2% scale to deal with ABS material shrinkage. It probably doesn't matter what material you print with. Make sure to scale the model accordingly to your filament and printer.
How I Designed This ===================
Attributions
I took the bottom flange from https://www.thingiverse.com/thing:4034309 and smashed it into the top shorter section from https://www.thingiverse.com/thing:5725259
Many thanks to bc_sha and Garu_209 for their models.
Category: Audio