Vault Crate (print-in-place) with locking nut, various sizes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sturdy crate in a heavy/armored design, locked with a nut. Print-in-place (except for the nut).
- Rating
- 5 / 5
- Likes
- 171
- Downloads
- 722
- Makes
- 11
- Views
- 3,230
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A print-in-place crate/box in a heavy/industrial/armored/SciFi design.
I usually tend to minimalistic and vase mode designs, but I wanted to do something bigger this time. This is also a design with a more restrictive license than I usually use.
There are currently 3 sizes; however if you need a different size, leave a comment and I might add it. The mini is the smallest reasonable size. The numbers indicate inside dimensions. Printing the nut in another color adds a nice touch.
I also made a pencil case version.
This box is inspired by Clockspring's style; if you like this kind of boxes, you might want to take a look - they are not for free though.
I relaxed tolerances a bit, so most printers and filaments should work.
Printing: I used Marble Grey PLA Prusament, 0.4mm nozzle, 0.2mm layer height. No supports. It's a print-in-place model and prints fully assembled (except for the nut).
Edit: added another nut model with a more vault-like appearance. See pencil case for a photo.
Edit: Added more sizes, one should match most speed cubes, the other is for lots of playing cards (like Magic The Gathering etc.) stored vertically.
Edit: Slightly sized up the 2 decks of cards version to adapt theory11 decks.
Edit: Added version for 1 deck of cards