Magnetic Marble Run: Splitter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A splitter piece for the ZombieHedgehog/Polymaker marble run!
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 51
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A splitter track for the ZombieHedgehog/Polymaker marble run!
This model does not require any fasteners or glue. It is held together by the same magnets that will connect it to the whiteboard.
A splitter track is a fairly common marble run mechanism, but I've designed this from scratch with no references as a design challenge for myself to see if I could figure it out. This is the result.
It's a 3 part marble run track:
- Split Track Body
- Split Track Mechanism
- Split Track Cover
Center of track to the end of the magnet is 15mm.
Includes holes for 10mm x 5mm magnets. (up to 3 magnets per assembly, but you could probably get away with the 2 just in the cover)