Prusa LACK enclosure gap fillers remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a remix of GOATDIY for the LACK enclosure gap fillers.
- Rating
- 4 / 5
- Likes
- 44
- Downloads
- 186
- Makes
- 1
- Views
- 1,380
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
this is a remix of GOATDIY for the LACK enclosure gap fillers.
https://www.prusaprinters.org/prints/17934-prusa-lack-enclosure-gap-fillers
Great design and much better looking for the IKEA enclosure.
However it seems there is a problem on the verticals STL files.
The space/depth to insert the glass is not the same than the horizontal one (6mm vs 9mm).
You also want to shorten these verticals by 1.5mm so you don't need the spacer.
new version here.
There is also a typo in what to print - you need per face 2 horizontal (left & right) and 6 (not 4 horizontals) as you need two more horizontal to complete the vertical (as the bottom leg holder does not require the redesign like the top one).
Hope this helps (for the 3 faces = 18 horizontals and 6 verticals - 3 left / 3 right).
Long print but much nicer (and actually efficient) design for the enclosure.