Star Wars Rebels Phantom I
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.19 – €0.23 net (excluding VAT)
For file: star_wars_phantom_test_0.07mm_PLA_MINI_17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 17.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A replica of the Phantom I shuttle from Star Wars Rebels. It has foldable print-in-place wings.
- Rating
- 0 / 5
- Likes
- 87
- Downloads
- 379
- Makes
- 1
- Views
- 1,320
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
A replica of the Phantom I shuttle from Star Wars Rebels.
It has foldable print-in-place wings.
The scale is at 1:270 with a length of 43.1mm and a wingspan of 36mm. (The hinges are 2mm in diameter.)
Holder uses a small base and small pin from here.
Print instructions
You can print "star_wars_phantom_test" first to test your settings. This will only print one wing.
The wings should be printed horizontally, parallel to the printbed.
I do not recommend changing the scale.
I have used 0.07mm layer height and supports on printbed only.
If you want to use the holder, use the .gcode-file with peg or add a small peg before slicing.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#