Adjustable endstop for modified Z-axis on ShenzenTech Printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small modification to add an adjustable Z-Endstop to my modified ShenzenTech Printer.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A small modification to add an adjustable Z-Endstop to my modified ShenzenTech Printer.
NB: The picture shows the first version of the classic Shenzentech's motor plate; the stl of this version is better sized (longer on X axis and shorter on Z) and the smooth rod is aligned with the screw rod to conform with other modifications I've done to match classic Prusa design (rod alignment and spacing)
Print instructions
Category: 3D Printer Parts Summary
A small modification to add an adjustable Z-Endstop to my modified ShenzenTech Printer.
NB: The picture shows the first version of the classic Shenzentech's motor plate; the stl of this version is better sized (longer on X axis and shorter on Z) and the smooth rod is aligned with the screw rod to conform with other modifications I've done to match classic Prusa design (rod alignment and spacing)
Print Settings
Printer:
Prusa i3 China Derivated
Rafts:
Doesn't Matter
Doesn't Matter
Resolution:
0.2
0.40%
Post-Printing
Holes adjustment
Adjustment:
Every holes may need to be drill a little (While designing it I had considered it was best too tight than too loose)
Parts needed:
2x longer 3mm screw for the fixation to the X-carriage
(for the original ShenzenTech X-carriage 22mm is OK)
1x 5mm screw for the adjustment screw.
How I Designed This
