1 / 2
VCore 3.1 Power Connector Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting box for C19/20 power connector/breaker for use on a VCore 3.1
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Custom mount / protective box for the C19/20 power connector/breaker I used on my VCore 3.1 500. I was inspired by Michael from Teaching Tech's design style, but I did recreate it from scratch.
I used M3 heat-set inserts in the back section, and just some M3x10 counter sunk screws to hold both halves and the connector itself together.
C20 Connector:
https://www.digikey.com/en/products/detail/e-t-a/3120-N526-P7T1-W02D-X3120-B040011M-15A/15214333
C19 Plug/Cable:
https://www.digikey.com/en/products/detail/schurter-inc/6051-2041/2682474