1 / 5
V-Slot storage drawer - Elegoo Neptune 3 Pro
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Additional storage for elegoo neptune 3 pro. Fit a 4x4 and 4x5 gridfinity baseplates for additional organization.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 98
- Makes
- 0
- Views
- 1,106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Additional storage for Elegoo Neptune 3 Pro (other printers might fit as well)
Mounts on the 2 v-slot rails at the left side of the printer, and fits 4x4 and 4x5 gridfinity base plates.
- You will need to remove the front panel to install this.
- The clearance between the housing and the drawers are pretty tight (0.2mm) so make sure your printer is well tuned first, or you might have to do some sanding.
- The housing is set to hover 5mm above the table to avoid scratches. I added rubber padding to prevent bending, but you can print the provided leg model and superglue them on.
- To lock the housing in place, add the spacers inside the v-slot (shorter one to back, longer one to front)