Pikocore DIY Kit Back Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Clip on back cover for the Pikocore DIY kit from infinitedigits/Zack Scholl.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 49
- Makes
- 0
- Views
- 421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
Just put together this DIY kit for Zack Scholl's sweet lo-fi pocket operator cousin. Loved the kit and the device but felt my fingers getting poked by my solder points on the back of the board. Whipped up this quick cover that clips onto the female pins holding the rp2040/pico board at the top. May work on a more elaborate cover that offers more portable protection at a later date. Was quite fiddly getting the tolerances to hold with clips and the board sliding in.
I don't have the non-DIY device but I would assume it won't fit.
Printed with the prongs pointing vertically and on top with support.