Primer filler for Dillon primer pickup tubes
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.64 – €0.78 net (excluding VAT)
For file: small_parts_02mm_petg_mk3s_55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.71 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 54.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Designed to fill Dillon primer tubes with primers, both small and large.
- Rating
- 4 / 5
- Likes
- 67
- Downloads
- 547
- Makes
- 1
- Views
- 4,614
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to fill Dillon primer tubes with primers, both small and large.
This is a multipart model, print files are provided merely as sample, as modifications of print conditions on user side are assumed.
Important notes:
- Device functionality and reliability fully depends on drop holes precision - in Body_1 and both Drop parts! This can be tricky and annoying to achieve with 3D print, as both printer and material introduce deviations.
- Electric equipment used:
Motor RE-260RA, for example:
https://www.aliexpress.com/item/4001218364427.html
Speed PWM controller PWM 5V-30V DC 5A, for example:
https://www.aliexpress.com/item/33018272548.html
9V Battery Snap Connector, for example:
https://www.aliexpress.com/item/32874851624.html - Other components:
M3x12 Hex socket bolts
3mm plexi glass
Print instructions
For Body and cover parts use Brim to eliminate warping.
Otherwise no specific requirements, printable from PLA and/or PETG - your choice.