Ekster, nightingale flywheel blaster

This is the Ekster,

Its a nightingale wheel mechanical semi auto blaster. Its basically a gryphon merged with a flycore meant to make a sleeker but somewhat cartoonish old school smg look. 

Assembly,

its pretty straight forward but the stock needs to be glued so after you put in the stock pins just apply a generous amount of adhesive and let it rest. The “connector” parts need to be printed twice and require sanding for the perfect fit.

Print settings

Especially the moving parts should be printed at relatively high quality. Most parts however can be done fast and low quality.

Hardware:

screws, roughly 30 m3x12. (self tappings are optional but preferred) Nerf toy screws will work

A pair of high RPM flywheels. (loki's or Honey-badgers for example)

A 5A cherry switch. (can be higher amp but i can't assure it will fit)

A trigger return compression spring. (pen springs will work.)

A 2x20mm steel dowel pin for the gear. (or cut a same diameter nail to size)

Thanks to/credits/remixed files:

 the flycore for the blaster base  (All rights and property of the Flycore design is owned by OldFusionDesigns.)

Gryphon for pusher 

The people on various nerf discords for the mental support, ideas and design help

If you have comments, concerns or questions please reach out to me on my discord my username is "vliegtuigje".