1 / 3
Knob for ARGUS - Flush-mounted sensor module 180 with switch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement knob for Merten MEG5711-0319 ARGUS 180 UP Sensor-Modul mit Schalter.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 114
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Due to a broken axis of the original knob for the switch of te sensor module I made a replacement. I used Polymaker Polymax because of good Layer adhesion. The wall of the cylinder is thin you need very good layer-adhesion because of the printing direction. For Bottom and top I chose concentric. 0.2 mm printing height and 0.4 nozzle.
I did some minor cleaning with sandpaper ans a 4 mm drill bit . The knob is just pushed in lightly.
Happy printing