Organizer/Basket for Drawer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.03 – €2.48 net (excluding VAT)
For file: C_StandardBox_M_Lid_125x101x60mm_0.2mm_PLA_MK3S_2h4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.25 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 2.07 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Drawer baskets / organizer in five sizes with lids.
- Rating
- 5 / 5
- Likes
- 660
- Downloads
- 2,393
- Makes
- 12
- Views
- 9,053
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My father needed drawer baskets for his good old kitchen from the 70s. He tried to find drawer baskets suitable for these weird dimensions today, but he searched in vain. So what do I have a 3D printer for? 😊, so I designed some.
You can find the stackable version of the baskets here: Stackable Baskets/Organizer
Model
Drawer baskets in five sizes with lids.
Originally there was only the XL version, but now there are many smaller versions.
There are 5 different versions:
| Length [mm] | Width [mm] | Height [mm] | |
| Model XL | 204.0 | 124.5 | 60,0 |
| Model L | 187.5 | 101.5 | 60.0 |
| Model M | 124.5 | 101.5 | 60.0 |
| Model M Long | 204.0 | 62.0 | 60.0 |
| Model S | 101.5 | 62.0 | 60.0 |
Each of the baskets has two lid variants. One with and one without a handle.
Printing
All parts can be printed without supports. A 0.4 mm nozzle and a layer height of 0.20 mm with printer default settings for infill, etc. are sufficient for printing.
If you use the STL files, you should pay attention to the alignment of the lids. You should print them with the top side facing down (on the print bed).
Assembly
There is nothing to assemble. Print and tidy up your drawers.
Remix
To remix the model or make your own changes, you will find the FreeCad project in the files as always.
Update 2023/12/31
Original files updated and new sizes added.