Mk4 LCD cover with pawn-like grip
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.24 – €1.51 net (excluding VAT)
For file: MK4_screen_cover_0.4n_0.05mm_PLA_MK4_1h58m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.37 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 1.96 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A nice print to cover the light pollution from the MK4. Print out of dark material or cover the back with black tape.
- Rating
- 4.8 / 5
- Likes
- 18
- Downloads
- 122
- Makes
- 5
- Views
- 576
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Liked the original creation, but the grip felt weird. Made my own inspired version completely from scratch.
Remember to print it out of a dark opaque material or cover the back with some black electrical tape. Some light could pass through otherwise.
Also keep in mind that the mk4 has some backlight shining on the table below the display. This cover does nothing about that.