(breakable) Shoppingcard Chip / Einkaufswagenchip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Most shopping cards are possible to unlock with "put in - put out" but sometimes the "loading" is sideways, so it…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 106
- Makes
- 1
- Views
- 522
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Most shopping cards are possible to unlock with "put in - put out" but sometimes the "loading" is sideways, so it needed a coin.
There are also some reusable solutions.
But I prefer a small solution that only becomes a cap in an emergency, in which case I would then reprint it afterwards.
For best "round" coins it is necessary to print the coin and the mount layer separately but beside. So, I added divided parts separately.
In the .m3f version for PrusaSlicer I also shorted the "bridge"-part on the mount for better breakings.
For best results I recommend importing the 3mf project.
Initial I printed with my Ender 3, my Bambulab P1S prints better, so it was necessary to put the parts closer together, so that they got smelt right together. Maybe it is necessary to adjust the distance by yourself.
Every filament is fine, i think you know the benefits of the different types.