Vax Rapide Ultra 2 water tank clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement clip to retain water tank on the carpet washer Vax Rapide Ultra 2
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 44
- Makes
- 0
- Views
- 317
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Replacement clip to retain water tank on the carpet washer Vax Rapide Ultra 2.
Will need supports, and to print so that layer lines create strength in the part.
I printed in ABS to resist creep, and I was using tree supports. I'm sure would work well with a 0.4 nozzle and 0.2 layer height. but I printed with a 0.6mm nozzle and 0.3mm layer height to maximise material strength withing the layer and minimise the number of layer interfaces. I used 3 lines at 0.72 line thickness for a 2.16mm wall, 3 bottom layers, 4 top layers, 15% zig zag infill and it's more than strong enough.