1 / 1
JDM / Japanese licence plate adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to change from Japanese standard 8 1/4" (209.5mm) hole spacing to North-American 7" spacing.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 95
- Makes
- 0
- Views
- 540
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Use this part on a Japanese Domestic Market car in order to affix a North-American licence plate.
You will need:
- two M6x20 flathead bolts to affix the adapter to the car
- two M5 hex nuts
- two washers
- two M5 button head bolts to affix the plate to the adapter
The hexagonal pockets are deep enough for a nylock nut.
The picture is after an entire summer of use, so the bolt heads have a bit of surface rust in the picture. It might be a good idea to use higher quality than what I did.