Silicone Tube Nozzle Tip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thin nozzle tip fits 3m marine silicone 3 oz tube, but will likely fit other tubes of similar size.
- Rating
- 5 / 5
- Likes
- 67
- Downloads
- 690
- Makes
- 8
- Views
- 1,751
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This thin nozzle tip fits a 3m marine silicone 3 oz (88ml) tube, but will likely fit other tubes (silicone, grease, other sealants, adhesives, etc.) of similar size or shape.
The nozzle tip is quite fine (i.e. small outlet diameter) for controlled placement of silicone. It can be cut closer to the screw end if you wish a larger diameter hole. Also has a faceted collar for better grip as you screw it on.
I suggest printing at 0.12 mm layer height or similar, and 3 walls. I used PLA.
9/13/23: When using PLA, the nozzle is quite brittle to snip or cut the end for a larger opening. PETG might work better in this regard….