1 / 3
Shelly1 Case (with optional hanger)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimal case to hang a Shelly 1 or Shely 1PM to the wall, with a slot to put cable through (with or without hanger).
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 41
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple case for a Shelly 1 or 1PM (classic version). Has a snuggle fit to hold it in place. Cable slot to feed cables in. Comes with a lid screwedin with 2x M2 screws (4mm to 12mm length). The models contain three versions: case without hanger, hanger on narrow edge, and hanger on back. The lid is the same for all three.
Print Instructions
This should be an easy print.
| Printer | MK3s+ |
| Filament | Prusament PETG (any material should work) |
| Infill | 15% |
| Supports | None |