Arm rests with shelves
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dynamic arm rests, mainly created for the use with split keyboards.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 33
- Makes
- 0
- Views
- 536
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: This is a work in progress, as such I would advice against printing this in its current state.
My first prototype of dynamic arm rests, mainly created for the use with split keyboards. Inspired by the DxRacers original design.
Currently only supports DxRacer chairs.
As the project reaches something usable, printing and assembly instructions will follow.
Some M3-M5 nuts and bolts required, a few springs, a couple of 6mm balls (I used airsoft BBs but would prefer steel later on)
You need to pause "p5 Double hinge.003" and “p11.1 Armrest_bottom_piece” in order to embed some bolts. Some force required.
Each stl that ends in “.right.stl” or “.left.stl” are unique to each side. All other stl files can be mirrored in your slicer for the left side of the chair.