1 / 7
Internal RGB Lightstrip Holder for BambuLab P1P / X1C — image 1
1 / 7

Internal RGB Lightstrip Holder for BambuLab P1P / X1C

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple remixed bracket to house an RGB led strip with a control board that connects to the X1C's 5V led header.

Rating
0 / 5
Likes
11
Downloads
56
Makes
0
Views
710
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I didn't want led strips on the outside of the printer and came across Rowaller's model. I loved the simplicity of it and how it just slides over the frame and connects to the X1C's 5V led header.

However, I wanted to upgrade their model to allow for more room to fit an led controller.

This remix now has room to fit this type of led controller: https://www.amazon.com/dp/B075SXMD9Z

Simply take the heat shrink off and wire up to the led strip.

The bracket will fit any led light strip that is 10mm in width, but this is the one I used: https://www.amazon.com/dp/B0956C7KFR

I bought some JST 1.25 connectors to make a splice/y adapter so you can still plug in the OEM light as well: https://www.amazon.com/dp/B013JRWCBU

Easily comes off in case your printer needs to go back for warranty repairs.

Print the models as they are positioned in the .STL with a brim and then glue the pieces together.

Parts 1 and 2 are the original files from Rowaller. The only part that''s changed is Part 3.

Drop-in upgrade with little wiring needed.