Flip Stop Block (print-in-place) for fenceless miter saw station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print in place flip stop block for use with standard t-track. Option for adding a t-track extension arm.
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 187
- Makes
- 1
- Views
- 2,108
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a flip stop block for use on a fenceless t-track miter saw station. The basic flip stop version requires just a 5/16 T-bolt and a threaded knob. Your t-track should be placed behind the plane of the miter saw fence so that the stop can be flipped out the way.
The second version includes the option to add an extension arm made of the same t-track. You'll need a second 5/16 T-bolt. An end-cap for the extension arm is also included. It is held on by a third t-bolt.
All models should be printed upside down on their top side; no supports should be required. I printed using PETG with 25% infill. Tolerances on the print-in-place hinge for the flip stop are at least 0.3mm so most printers should have no problem.
