1 / 3
5.25" mesh airflow drive bay cover for PC tower - choose your own mesh pattern — image 1
1 / 3

5.25" mesh airflow drive bay cover for PC tower - choose your own mesh pattern

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replace those crusty old drive bay covers with a 120mm fan and some custom perforated covers

Rating
0 / 5
Likes
15
Downloads
446
Makes
1
Views
2,071
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

I modified an old ATX case to have some front-facing intake airflow by adding a 120mm fan and some custom mesh 5.25" drive bay covers.

This is v2 which has extra filets for strength.

Rather than design with a specific mesh pattern, choose your own! Just select your favorite infill pattern in PrusaSlicer to customize. You may need to adjust the infill angle and percentage to get the look you want. The more infill %, the less airflow but the more dust you will capture. Recommend setting the fan away from the mesh by at least 10mm to minimize noise/turbulance.

Print settings:

  • PETG

  • perimeters: 3 (0.4mm nozzle)  2 (0.6mm nozzle)

  • layer height: 0.25mm

  • top layers: 0

  • bottom layers: 0

  • infill: honeycomb, triangle, or grid

  • infill: 25-50%

  • infill angle: 30° or 15°

  • supports: support enforcers only for the extreme left and right edges that print would otherwise sag down too far

Tags