solidoodle extruder e3d clone mk8 hobbed gear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I bought a mk8 hobbed gear and it offset the extruder to the hotend. So i reverse engineered lawys mk8 and made it…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I bought a mk8 hobbed gear and it offset the extruder to the hotend.
So i reverse engineered lawys mk8 and made it suit the smaller hobbed gear.
Added a filament path while i was there too that used a random bit of PTFE tube that was 6mm in diameter.
I used mdromans modified tension arm for the hobb goblin in this design so all credit goes to him for that.
the random bit off the side is so i could cable tie the cables to it.
designed in autodesk inventor pro 2015.
i goofed up on the orientation so i was lazy and just fixed that in repetier.
Print Settings
Printer Brand:
Solidoodle
Printer:
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
50%
Notes:
make sure you check your printers calibration before you print.
moist filament isnt cool either
Category: 3D Printer Extruders