Baby bathtub hook

Baby bathtub Hook with Mount 

Materials Needed:

• Filament material (PLA or PETG)
• Mount (printed on the side)
• Hook (printed with support)
• Double-sided tape
• Baby bathtub

Steps:

Preparing the Wall:

• Choose a suitable location on the wall for the baby bathtub hook. Use a level to make sure the mount will be installed straight.
• Clean the wall surface where you'll be attaching the mount. This will ensure a better adhesion of the double-sided tape.

Attaching the Mount with Double-Sided Tape:

• Cut the double-sided tape into appropriate lengths to cover the backside of the mount.
• Remove the protective backing from one side of the double-sided tape and apply it to the back of the mount.

Mounting the Hook:

• Once the tape is applied to the mount, press the mount firmly against the cleaned wall surface. Hold it in place for a few moments to ensure good adhesion.

Hanging the Hook:

• Slide the hook into the mount, which is now adhered to the wall.

Testing and Usage:

• Carefully test the hook's stability by gently tugging on it to ensure it's securely attached.

Please note that while double-sided tape can be a convenient way to attach lightweight items, it may not provide the same level of security and stability as screws and anchors. Always keep a close eye on the stability of the hook and mount, and avoid using this method if you have any doubts about its reliability.