2020 double profile cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Now you can cover the space between two profiles of your printer.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 50
- Makes
- 0
- Views
- 418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Now you can cover the space between two profiles of your printer.
Designed for constructions with 40mm spacing between popular aluminum profiles 2020.
Change only the height into a slicer and adjust the cover to your needs.
Print with 100% infill and sloowly. Flat surfaces don't like rushing.
I normally print 60 mm/s on my Kossel, these covers only up to 20 mm/s.
Do not use the brim method, because the contact of the two parts will be very visible.
Print instructions
Category: 3D Printer Parts Summary
Now you can cover the space between two profiles of your printer.
Designed for constructions with 40mm spacing between popular aluminium profiles 2020.
Change only the height into a slicer and adjust the cover to your needs.
Print with 100% infill and slowly. Flat surfaces don't like rushing.
I normally print 60 mm/s on my Kossel, these cover only up to 20 mm/s.
Do not use the brim method, because the contact of the two parts will be very visible.
Print Settings
Printer Brand: Anycubic Kossel
Rafts: No
Supports: No
Resolution: 0.15-0.2mm
Infill: 0% (vase mode) or 100%